Home > Interface and Driver Circuit
Interface and Driver Circuit   
Part No.
Features
IOS(H)
IOS(L)
VDD、VSS
VOH
VDD、VSS
VOL
package
Multiple RS-232 Driver & Receiver
-4.5~-19.5(mA)
7.5V(RL=3KΩ)
-7.5V(RL=3KΩ)
DIP-20 SOP-20 SSOP-...
Multiple RS-232 Driver & Receiver
-4.5~-19.5(mA)
7.5V(RL=3KΩ)
-7.5V(RL=3KΩ)
DIP-20 SOP-20 ...
Multiple RS-232 Driver & Receiver
-8.5~-19.5(mA)
7.5V(RL=3KΩ)
-7.5V(RL=3KΩ)
DIP-20 SOP-20 SSOP-...
7 CH Darlington Sink Drivers
500mA
Vout=50V
Vin=24V
SOP-16/DIP-16/TSSOP-...
7CH darlington sink driver
500mA
Vout=50V
Vin=24v
DIP-18 SOP-18
8-CH Darlington Arrays(CMOS Or PMOS)
500mA
50V
30V
DIP-18 SOP-18
8-CH High Voltage Source Driver
Ic=500mA
50v
30v
SOP-18
8-CH High Voltage Source Driver
50V(MAX)
0V~2.0V
0V~2.0V
DIP-18/SOP-18/SOP-20...
8CH high−voltage source driver
-500mA
50V
30V
SOP-28
20-BIT Serial To Parallel Converter
25mA
4.97V
0.11V
SOP-28
3v to 5.5v multichannel rs-232 line transceivers with ±15kv esd protection
±60
5.4
-5.4
TSSOP-20
high performance rs-232 line drivers/receivers
18mA
3.5
0.4
DIP-16/SOP-16/SSOP-1...
3.0v to 5.5v low power multichannel rs-232 line transceivers using for 0.1μf external capacitors
±35
3.2
0.4
SOP-16 TSSOP-16
+3.0v to +5.5v power supply, 250kbps, multichannael rs-232 line drivers/receivers
VCC= -0.3~+6.0
Pd= 870mW
Icc= 1mA
TSSOP-20
fail-safe, 10mbps, rs-485 / rs-422 transceivers with ±15kv esd-protected
35
3.5
0.5
SOP-8
fail-safe, 1.0mbps, rs-485 / rs-422 transceivers with ±15kv esd-protected
-250
6.5
0.5
SOP-8
high voltage high current darlington transistor array
Vce = 50V
-
-
SOP-16
ic card interface
VDD= 2.7 ~ 6.5
0.9VCC ~ VCC+0.1
0 ~ 0.3
TSSOP-28
fail-safe, 500kbps, rs-485 / rs-422 transceivers with 15kv esd-protected
250mA
6.5
0.5
SOP-8
fail-safe, 500kbps, rs-485 / rs-422 transceivers with 15kv esd-protected
95mA
2
0.8
SOP-8
fail-safe, 115kbps, rs-485 /rs-422 transceivers with
125μA
5.5
0.4
SOP-8 SOP-14
fail-safe, 115kbps, rs-485 / rs-422 transceivers with ±12kv esd-protected
-250 ~ 250mA
VCC-1.5V
0.5V
SOP-8
4x2 switch matrix with tone/polarity controller
VDD= +5 V
IP= +17dBm
TSTG= -65 ~ +150°C
QFN-20(4X4)
7ch darlington sink driver
VCE= 50V
VI= 30V
IOK= 100mA
DIP-8 SOP-8
ground fault interrupter
ICC= 15mA
VCC= 16V
IQ= 350~450µA
SOT-26
+3.0v to +5.5v power supply, 250kbps, multichannael rs-232 line driver/receiver
Ishdn=1.0~ 10 µA
Icc= 0.3~ 1.0 mA
Vlgl= 0.8V
SSOP-16 TSSOP-16
3.0v to 5.5v low power multichannel rs-232 line transceivers using for 0.1μf external capacitors
±35 ~ ±60 mA
+5.0 ~ +5.4 V
-5.0 ~ -5.4 V
SOP-16 TSSOP-16
driver circuit special purpose for microwave oven
Iout = 100 mA
Vr = 50 V
If = 70 mA
SOP-16
driver circuit special purpose for microwave oven
Iok = 100 mA
Vr = 50 V
If = 70 mA
SOP-16
4-ch darlington sink driver and 3-terminal 0.2a 5v voltage regulator
Vin = -0.5 ~ 30 V
Ileak = 50 / 100μA
Ir = 50 / 100μA
SOP-14
+3.3v to +5.0v power supply, 250kbps, rs-232 line drivers/receivers
VIN= -0.3 ~ +6.0 V
VOUT= ±13.2 V
PD= 870 mW
TSSOP-28
high voltage high current darlington array
ICEX= 50 μA
IIN (ON)=0.82 ~ 1.25...
VIN(ON)=17 V
SOP-16
+3.0v to +5.5v power supply, 235kbps,multichannael rs-232 line drivers/receivers
ISHDN= 1.0~ 10 µA
ICC= 0.3~ 1 mA
VRR= -25 25 V
SSOP-28(209mil)TSSOP...
1-ch differential sensitivity calibration capacitive touch sensor
VDD= 2.5 ~ 5 V
CS= 10 pF
CR= 12 pF
SOT-26
3ch darlington sink driver
ICEX= 50 μA
VIN (ON)= 2.8 ~12 V
II(ON)= 2.1 ~2.5 V
DIP-8 /SOP-8
+3.0v to +5.5v power supply, 235kbps, multichannael rs-232 line drivers/receivers
SSOP-28 (209mil) TSS...
low power ground fault interrupter
I Q= 500 μA
V OS= -200 0 200 ...
SOP-8
low power ground fault interrupter
I Q=450 ~750 μA
6.8 ~ 8.1 V
-9.5 ~ -13.5 V
SOP-8
ground fault interrupter
I CC= 15 mA
I Q= 350 ~ 480 μA
V REF = 5.8 ~ 6.2 ...
SOT-26
ground fault interrupter
I CC =15 mA
I Q= 425 ~ 575 μ...
V REF = 6.85 ~ 7.1...
SOT-26
single-channel, ultra-low resistance load switch
DFN2020-8
8 channel serial interface low-side driver
1.2 V
TSSOP-16

总数:42 首页上一页下一页尾页 页次:1/1

Copyright 2011 UTC All received